3P Calmed Inlet

Art. Nr. 4000100

3P Calmed Inlet 125 mm/110 mm Provides a calmed inlet for rainwater in the storage tank. Prevents disturbance of settled sedimentation layer. Made of Polyethylene.

3P Floating Pumpe Intake 1"

Art. Nr. 4000600

For the abstraction of the cleanest rainwater from the storage tank. Connects to suction pipes 1".

• Floating ball, diameter 15 cm
• Filter inlet sleeve, mesh width 1.2 mm
• Check valve, 1"
• Connection spout 1"

3P Suction Pipe

Art. Nr. 4000642

Special suction pipe, resists biological growth. High quality.

3P Floating Pumpe Intake with suction pipe 2 mtr.

Art. Nr. 4000620

For the abstraction of the cleanest rainwater from the storage tank with 2 m suction pipe.

• Floating ball, diameter 15 cm
• Filter inlet sleeve, mesh width 1.2 mm
• Check valve, 1"
• Connection spout
• 2 m suction pipe

3P Submersible Pump Base with floating pump intake

Art. Nr. 6000310

Housing to fix a submersible pump on the bottom of a rainwater tank and to connect floating or fixed suction fine filters to the submersible pump, according to requirements. This protects the pump from sucking up sediment and thus increases the safety of every rainwater installation. To support submersible pumps in the storage tank. With Floating Pump intake. Diameter of 130 mm.

3P Overflowsiphon mono

Art. Nr. 4000250

Overflow siphon, with rodent and odour barrier, with skimming effect on tank water surface from chamfered inlet slots.

3P Overflowsiphon duo

Art. Nr. 4000200

3P Overflow siphon duo is installed between the filter and the tank. Overflow inside the rainwater tank.

3P Overflowsiphon uno

Art. Nr. 4000260

3P Overflow Siphon Uno With screw-threaded union connector, ideal for installation through plastic tank walls.

3P Backflow Valve

Art. Nr. 4000900

3P Backflow Prevention Valve Prevents backflow of any contaminated water from drainage system entering the rainwater tank.